Moni Rider 2in1 Instrucciones De Uso página 8

steering wheel, which are designated for the fixing bolt. Slide through them the bolt and tighten it using nut
and wrench.
3.Slide the axles of the front wheels into the designated openings in the front car body. Push to fix them.
4.Put the backrest in the rear car body and press down until it is fixed.
5.Attach the safety board. It is made of 2 rails. The rear part of the rails should be attached to the backrest
holders'. Their front parts must be attached to the steering wheel. Press down until they are fixed. You will
hear a click sound.
6.Put the parent control handle in the opening in the back part of the backrest. Press carefully down until the
handle is fixed. You will hear a click.
B.See Figure B: Attach the footrest to the bottom part of the car body. The plastic pins must enter the
designated openings in the car body. Push forward to fix it.
C.See Figure C: The battery compartment is on the steering wheel. Use a screwdriver to remove the screws
from the battery compartment cover. Lift the cover and place 2 batteries 1.5V AA according to the polarity „+"
/ „-" marked in the compartment. Reattach the cover and fix it using the screws and screwdriver. Note! The
batteries are not included in the package. WARNING! Children should not be present when placing the
batteries.
V. FUNCTIONS
1.Music functions – See Figure 1: On the steering wheel there are music and horn buttons.
2.Additional toy storage – See Figure 2: Lift the seat. Under the seat there is extra storage for toys.
3.Use without the safety board and the parent control handle – See Figure 3, 4 and 5: When your child is old
enough to use the car, you should remove these parts – the safety board, the foot rest and the parent control
handle. To remove the handle, press the button on the rear part of the backrest. To remove the safety board,
slide the button on the rails. Then lift the front part of the rails and take of the rear parts from the backrest. To
remove the footrest, lift the buckle in the middle and push back.
VI. CLEANING AND MAINTENANCE OF THE PRODUCT
1.Clean the product regularly.
2.When cleaning the product, do not use corrosive strong detergents, alcohol based ones or such with abrasive
particles.
3.Clean with a slightly wet soft cloth. Wipe the product dry with soft cloth immediately afterwards. DO NOT
wipe with wet cloth the following parts that contain electric components – steering wheel, battery
compartment and loudspeaker. These parts must be wiped with dry cloth.
4.Inspect the product regularly for broken, chipped or damaged parts. If you find any, do not use the product
until the damage is removed.
5.Upon damaging, contact the shop, from which you bought the product or the importer.
6.Do not repair by yourselves and do not modify or alter the product, because this may endanger the safety of
your child.
7.Inspect regularly whether the main parts of the car are in good working order (steering wheel, main body
and wheels).
8.Do not expose at direct sunlight for prolonged periods of time.
9.Do not store the product near direct heat sources – open fires, heaters or cookers.
10.Store the product indoors in a dry and well ventilated place.
MADE FOR MONI TRADE LTD UNDER BRAND MONI; ORIGIN PRC
Importer: Moni Trade LTD
Address: Bulgaria, Sofia, Trebich quarter, Dolo str. No. 1
Tel: +359 2/ 936 07 90; Web: www.moni.bg
7