Replacing Fuses - Silverline 263764 Manual De Instrucciones

GB
Using the USB socket
• The inverter is fitted with a USB socket (4), which provides a maximum of 500mA
current. If you have a device that can be charged via USB or mains always use the USB
as it makes more efficient use of energy
Accessories
A wide range of Silverline products are available from your stockist including low wattage
power tools compatible with this inverter.
Maintenance
WARNING: The inverter contains no user serviceable internal parts.
Cleaning
• Keep your inverter clean at all times. Dirt and dust will cause internal parts to wear
quickly, and shorten the device's service life. Clean the body of your machine with a
soft brush, or dry cloth. If available, use clean, dry, compressed air to blow through the
ventilation holes (where applicable)

Replacing fuses

• A blade type fuse is fitted into the rear of this device
• When blown, only replace with another fuse of the same type and rating (see
'Specification')
• Determine the source of the overload or short, and remove before switching power back
on. If the fuse keeps blowing it indicates a fault condition with the unit
Disposal
Always adhere to national regulations when disposing of electronic equipment that is no
longer functional and are not viable for repair.
• Do not dispose waste electrical and electronic equipment (WEEE), with household waste
• Contact your local waste disposal authority for information on the correct way to dispose
of electronic equipment
WARNING: Do not dispose of lead acid batteries with household waste.
8