TEFAL INFINYMIX+ BL91HD65 Manual De Instrucciones página 4

Make sure all the packaging has been removed before operating the
appliance.
ASSEMBLING AND FITTING THE JAR
Moisten the seal (B1, C1) (even if already fitted on the blade unit (B2,
C2)). Be careful to correctly fit the seal (B1, C1) back onto the blades unit
(B2, C2) the correct way up.
Check the seal is in place on the blades unit. Place the blades (B2 or C2)
on the locking ring (B3 or C3) (Fig 1). Turn the jar upside down and fit the
locking ring with blades on the base of the jar (Fig 2). Lock it by rotating
to lock notch in the clockwise direction (Fig. 2). Make sure the locking ring
is locked correctly : the arrow on the jar must be aligned with the arrow
on the locking ring.
Add the ingredients into the assembled jar without exceeding the
maximum level indicated:
* 1.75 L for thick mixtures
* 1.5 L for liquid preparations
Warning : Do not pour boiling liquids (over 80°C/176°F) into the jar
Lock the lid on the jar and lock in the clockwise direction (Fig 5). Make
sure the lid is locked correctly : the point on the lid should be aligned with
point on the handle. Lock the middle cap in position on the lid and lock it
by rotating it in the clockwise direction. If the lid is not correctly locked,
your appliance will not start; Position the jar correctly on the motor unit :
the point on the jar should aligned with the lock on the motor unit. A jar
logo will appear on the screen and a bip signal will sound.
ASSEMBLING AND FITTING THE ON THE GO BOTTLE
Moisten the seal (E3) (even if already fitted on the blades unit (E4)). Be
careful to correctly fit the seal back onto the blades unit (E4) the correct
way up (Fig 9).
Check the seal is in place on the blades unit.
2