Troubleshooting - oneConcept MCH-1 V2 Manual De Instrucciones

TROUBLESHOOTING

Problem
The appliance does not
work.
The humidifier does not
work / The pump makes
strange noises.
Abnormal noises.
Possible cause
The plug has not been
inserted correctly.
The nebuliser unit
has not been installed
correctly.
The unit is switched off.
The wiring in the unit
has come loose.
No water in the water
tank or the water level
is below the MIN mark.
The filter screen of the
submersible pump is
clogged.
The water outlet hole
of the nebuliser unit is
blocked.
The pump or the wiring
in the unit has come
loose.
Deposits in the
nebuliser unit.
Loose fan blades or
engine damage.
Solution approach
Plug the power plug
securely into the wall
socket.
Install the nebuliser
unit correctly.
Switch the device on.
Contact a specialist
company for repairs.
Switch off the machine
and fill water into the
water tank.
Clean the filter screen.
Clean the nebuliser
unit.
Contact a specialist
company for repairs.
Remove the nebuliser
unit and clean the
components.
Contact a specialist
company for repairs.
EN
21