Channel Scan - Antop AT-215BB Manual De Instrucciones

LED
!
3 / Setting and Scanning
In the TV's setup menu, set the mode to "Antenna" or "Air", then, set TV to "Scan" for channels.
Consult the TV manual for detailed instructions.
4/ Placing and Adjusting Instruction
Test the antenna in multiple locations, and adjust it horizontally or vertically to find the best one
for reception before fixing it. A high location or positioning the antenna toward the broadcast
tower may result in better reception.
The
Push the smart switch On or Off and select the switching
with which more channels are received.
·Switch Off - The LED indicates
OFF/ON
·Switch On - The LED indicates
Scan channels after each switching in the Smartpass Amplifier

CHANNEL SCAN

scanning for channels
Smartpass Amplifier must be powered in order to function.
yellow for normal
green for stronger
3
reception.
reception.
4