Channel Scan - Antop UFO SMARTPASS AT-414B Manual De Instrucciones

3 / Setting and Scanning
In the TV's setup menu, set the mode to "Antenna" or "Air", then, set TV to "Scan" for channels.
Consult the TV manual for detailed instructions.
4 / Adjusting Instruction
For the best omni-directional reception, a clear path between transmitter and antenna is
needed. It is better to keep the dome in a horizontal position. In the case that there are
obstacles surrounding the house, the signal will be reflected and weakened. Please release
screw "A" and adjust the dome up and down for the best reception angle, then fasten the
wing nut.
5

CHANNEL SCAN

scanning for channels
3
Screw A