Fitting Instructions; Installation Recommendation - Panasonic PAW-TD23B6E5 Manual De Instrucciones

3.5.5 Pipe connection layout
Heat pump circuit
outdoor unit

3.5.6 Fitting instructions

!
The product must be filled with water before the power is switched on.
Any overflow pipe from the T&P valve must be installed uninterruptable and frost-free
!
with a continuous fall to the drain/gully.
The product should be placed in a room with a drain to avoid any damages in case of
!
water escaping from the product.
The product should be placed on a floor surface suitable for the total weight of the prod-
!
uct when in operation. See product data plate.
!
The product must have a service clearance of 120 cm in front of the cover / 50 cm on top.

3.5.7 Installation recommendation

Allow clearance to the floor for venting purposes. Screw the feet out a minimum of 15 mm
-
from the bottom of the product.
indoor
unit
60 70
50 40 80
30 °C 90
20 100
10 110
0 120
! WARNING
! CAUTION
RECOMMENDATION
DHW
Radiator circuit
9