Jimmy GT306 Manual De Usuario página 6

Assembly
Assembly of the Supporting Pole
According to the marks in the figure, the
supporting pole can be inserted directly during
assembly (Figure 1). When the supporting pole
needs to be taken out, press the release button
of the supporting pole downward and pull up the
support pole to take out .(Figure 2)
Note:supporting pole release button is only used
when the supporting pole needs to be taken out.
Assembly of Supporting Pole
Open the latch, stretch the supporting pole up
to the longest, then close the latch and press
to tighten. Disassemble the supporting pole in
opposite way after use .(Figure 3)
Assembly of Clothes Hanger
Open the latch on the supporting pole, insert
the bottom side into the supporting pole with the
steam nozzle hanger in the back .(Figure 4)
Assembly of Steam Nozzle
Insert the flexible hose into the round hole of
the host until a "click " sound is heard, then put
the steam nozzle on the steam nozzle hanger.
(Figure 5, 6)
Assembly of the Ironing Board
Install the pole latches to the ironing board, then
place the ironing cushion over the ironing board.
(Figure 7, 8)
Hang the ironing board on the clothes hanger
and fasten the ironing board on the supporting
pole with the latches. Disassemble the ironing
board in opposite sequense .(Figure 9)
4
1
Supporting Pole
Supporting Pole
Release Button
3
Latch
4
Clothes Hanger
Latch
5
7
Pole Latch
9
2
6
Steam Nozzle Hanger Part
ironing cushion
8