Sharp LL-173C Manual De Funcionamiento página 19

GAIN CONTROL Menu
AUTO
When [AUTO] is selected with the
[BLACK LEVEL] and [CONTRAST] settings are
automatically adjusted. After the automatic
adjustment, perform manual adjustment when
necessary.
BLACK LEVEL
Total screen brightness can be adjusted while
watching the color pattern. (
Color pattern
CONTRAST
While watching the color pattern, adjustments can
be made so that all gradations appear.
( buttons)
Notes:
About AUTO (Auto Gain Control function)
- The Auto Gain Control adjusts contrast and
black level based on the brightest and darkest
colors of the image displayed.
- If you are not using the adjustment pattern, it is
necessary to have black area and white area of
at least 5 mm x 5 mm (0.2" x 0.2") on the screen.
Adjustment may not be possible without those
areas.
- If the signal coming from the computer is
Composite Sync or Sync on Green, automatic
adjustment cannot be performed. Please perform
manual adjustment instead.
- If [OUT OF ADJUST] is displayed, perform
manual adjustment.
Adjusting the screen display
button, the
buttons)
19
COLOR CONTROL Menu
WHITE BALANCE
1. After selecting [WHITE BALANCE], press the
button.
The WHITE BALANCE Menu will be displayed.
2. Use the buttons to select [COOL], [·], [STD],
[·], [WARM], or [USER].
COOL ... Color tone bluer than standard
• .......... Color tone slightly bluer than standard
STD ...... Color tone standard setting
• .......... Color tone slightly redder than standard
WARM .. Color tone redder than standard
USER
- Selecting [USER] will display the setting
values for [R-CONTRAST], [G-CONTRAST],
and [B-CONTRAST], in order to make fine
adjustments.
- Use the / MODE button to select
[R-CONTRAST], [G-CONTRAST], and
[B-CONTRAST].
R-CONTRAST .....
G-CONTRAST .....
B-CONTRAST ......
3. Press the MENU button.
Notes:
- On settings other than [STD] not all gradations
can be displayed. To display all gradations, set
to [STD].
- If [DISPLAY MODE] is set to [sRGB] or [VIVID], no
other setting than [STD] can be selected.
GAMMA
Adjust so that dark and bright images are easy to
see. If the screen is dark and hard to see, increase
the numerical value. If it is bright and hard to see,
lower the numerical value. (
- If [DISPLAY MODE] is set to [sRGB] or [VIVID],
[GAMMA] can not be set.
button for blue-green
button for red
button for purple
button for green
button for yellow
button for blue
buttons)