Turning The Power On; Turning The Power Off - Sharp LL-173C Manual De Funcionamiento

Connecting the monitor and turning the monitor on and off

Turning the power on

1. Press the monitor's power button.
2. Turn on the computer.
Press power button.
When a signal is input from the computer, the
power LED lights up green, and the screen is
displayed. (After power is turned on, it may take
a little time until the screen is displayed.)
Notes:
- When using the monitor for the first time or after
having changed the system settings during use,
perform an automatic screen adjustment. (p.17)
- Depending on the type of computer or OS, you
may need to install the monitor set-up
information on your system. (p.24)
- When connecting to a notebook computer, if the
notebook computer's screen is set to display at
the same time, the MS-DOS screen may not
display properly. In this case, change the setting
to display only the LCD monitor.

Turning the power off

1. Turn the computer off.
2. Press the monitor's power button.
Turn on the
computer power
supply.
Turn the computer
off.
ON
If the monitor is not going to be used for a long
period of time, be sure to unplug it from the AC
outlet.
14
The power LED will disappear.
OFF
Press power button.