Basic Operation; Turning On The Lcd Tv; Power On/Off; Select Input Source - HANNspree JT01-32U1-00G Manual Del Usuario

BASIC OPERATION

To operate your LCD TV, you may use the TV remote control or top panel buttons to select
input source, change channels, or adjust volume.

Turning on the LCD TV

Before using the LCD TV:
1. Confirm that all external equipment is connected properly.
2. Insert the power plug and the power LED indicator will light red.

Power On/Off

To turn the LCD TV on/off :
Press POWER button under the LCD TV, or press the POWER button on your remote
control to turn on/off the TV. The power LED indicator lights green when the LCD TV is on.

Select input source

To select the desired input source:
Press the INPUT button on the remote control, Use ◄► to select the required input source
between TV, DTV, HDMI, YPbPr, AV, S-Video, and VGA.
To confirm the selection, press ENTER.

Volume Adjusting

Press VOL +/- to adjust volume.
To silence volume, press MUTE.
If you want to restore volume, press MUTE again, or press VOL +/- directly.

INFO

To display the current information of the LCD TV:
Press INFO, and the current state will be displayed on the screen. (It shows all or some of
the information about Input, Channel, Resolution, Audio Type, Smart Sound Modes, and
Smart Picture Modes, depending on what input source it is in.)
TV DTV
10