Technical Specification - HANNspree JT01-32U1-00G Manual Del Usuario

TECHNICAL SPECIFICATION

LCD
Input signal
Compatibility
Resolution
Speaker Output
Audio Output
Power
Operating
conditions
Storage condition
Dimensions
Weight
Regulations
Power saving modes
Preset Timing Mode (Pre-adjusted to GTF® 1366 x 768 @ 60 Hz)
Warning: Do not set the graphics card in your computer to exceed these refresh rates;
doing so may result in permanent damage to the LCD TV
Note: Product Specifications are subject to change without notice.
Type 32" TFT Active Matrix
Glass surface Anti-Glare
RGB RGB analog (0.7/1.0 Vp-p, 75 ohms) Separate Sync,
fh: 30-80 kHz, fv:50-75 Hz
RF TV system Antenna / NTSC+ATSC
Video 1 composite RCA, 1 S-Video, 1 YPbPr component,
1 HDMI
Audio 1 mini-stereo, 2 pair of RCA (L/R) stereo
PC Up to 1366 x 768 Non-interlaced
Recommended 1366 x 768 @ 60 Hz
and supported 1280 x 1024 @ 60 Hz
1280 x 720 @ 60 Hz
1024 x 768 @ 60, 75 Hz
800 x 600 @ 60, 75 Hz
640 x 480 @ 60, 75 Hz
10W x 2 @THD=10%
1 composite RCA (L/R), 1 SPDIF (optical),
1 Headphone jack, 1 stereo jack
Voltage 100-240 VAC, 50/60 Hz (auto switch)
Temperature 32°F to + 104°F ( 0°C to + 40°C)
Humanity 10% to 65% (no condensation)
Altitude To 10,000 feet (3,000m)
Temperature -4°F to + 140°F (-20°C to + 60°C)
Humanity 10% to 90% (no condensation)
Altitude To 40,000 feet (12,000m)
Physical 807.7mm (W) x 646.2mm (H) x 210mm (D)
31.8'' (W) x 25.4'' (H) x 8.3'' (D)
Net 21.8 kg (48.0 lb)
UL, FCC-B (Doc-B)
< 200 W (green LED)
On
Stand by < 3 W (red LED)
24