Maxell HYPERSHOCK CA-BTVH Manual De Usuario página 7

For the First Time Using
① Insert the Wireless transmitter into the USB port of the device, the device will
automatically install the driver, the name displayed on the device is: UG-05, and
the default is device audio transmission, the transmitter enters the standby
state
with the red LED lighting on inde nitely.
② The Wireless device enters the pairing state after power on, long press the
button on the Wireless transmitter for 2 seconds to enter the pairing status, and
the green LED will ash quickly.
③ The Wireless transmitter is successfully connected with the Wireless device,
and the green LED will stay on inde nitely
For the Second Time and Subsequent Using
When there is pairing information of the headphones on the device, for the
second time using, the Wireless transmitter will automatically connect back to
the Wireless device
Connect with Other Wireless Devices
Short press the transmitter button, the Wireless transmitter will be
disconnected with the current device with the red LED lighting on inde nitely,
and the Wireless device will be turned o . Long press the transmitter button for
2 seconds to connect with other devices, the green LED will ash quickly and
stay on inde nitely after connected successfully
Power On/Power O
Insert the Wireless transmitter into the USB port of the computer and it will
automatically turn on./Unplug the Wireless transmitter.
Wireless Connection
Long press the transmitter button for 2 seconds, the Wireless transmitter enters
pairing status with the green LED ashing quickly, now it supports listening to
music, Wireless video playback, Wireless video calls, etc.
EN 7