Installation Instructions For Amd Athlon Xp Clip - Gigabyte 3D Cooler Ultra GT GH-PCU31-VH Guia De Instalacion

Installation Instructions for AMD Athlon XP Clip

Figure 3
GH-PCU31-VH
Figure 1
Please add an adequate layer of heat sink paste on the
surface of the CPU. The picture on the right shows the
three insert spaces on the cooler bracket where the CPU
Figure 1
clips attach.
Attention!! The indication arrow on the cooler must
align with the central CPU clip.
Figure 2
Place the cooler atop the CPU and insert the indication
Figure 2
arrow side of the cooler in the space between the central
jut of the CPU socket and the edge of the CPU.
Figure 3
Align the three spaces on the cooler with the three clips
on the base of the CPU and then push firmly downwards
to lock the cooler securely in place. A flat-head
screwdriver can also be used to secure the clips in place.
Figure 4
Connect the yellow 3-pin connector wire of the cooler to
the CPU fan connector located on the motherboard.
Clip Installation is now com plete.
Figure 4
Note: Please refer to page 8 & 9 for power installation
and installation of the fan speed controller.
- 6 -