Power Installation And Pci Fan Speed Controller Installation - Gigabyte 3D Cooler Ultra GT GH-PCU31-VH Guia De Instalacion

Power Installation and PCI Fan Speed Controller Installation

Figure 2
Figure 4
Figure 1
Disassemble the turn knob, bolt and fan speed controller
from the 3.5" front panel and reassemble these parts onto a
Figure 1 PCI rear panel in sequence.
Figure 2
Place the PCI rear panel with the fan speed controller in the
selected PCI slot. Use screws to secure the PCI rear panel
in place.
Figure 3
Connect the power cable of the power supply to the end of
the 4-pin connector cable provided. Then connect the 3-pin
Figure 3
power connector on the fan speed controller to the 3-pin
connector on the cooler.
Figure 4
Installation is complete.
- 9 - GH-PCU31-VH