Operation; Control Panel; Turning The Emitter On And Off - Cointra Cosmos Instrucciones De Instalación

5. OPERATION

5.1 CONTROL PANEL

The control panel is made with a large TFT-LCD screen with white backlight and black images for
ease of legibility. There are six touch sensitive keys as outlined below:
TFT-LCD screen.
Standby key:
Switch the emitter
between Standby
and Operational
Confirm
days, hours, etc.

5.2 TURNING THE EMITTER ON AND OFF

To switch the emitter on, it must be connected to the electrical supply (230 V ~ 50 Hz) using the
plug; the standby icon or the current operating mode will appear on the screen. The emitter can
be turned off by unplugging it from the power supply.
If the emitter is in Standby mode, to set it to Operational touch and hold the
Standby key; a double beep will sound once the emitter is Operational. The
standby screen changes to show the welcome screen and then the emitter will
start in the last operating mode.
To configure the emitter in Standby mode, touch and hold the Standby key; there
will be a long beep and the farewell screen will appear. The back light will turn off
after 1.5 seconds.
A73023080
modes,
Multi-Function,
selection of
mode, temper-
atures, param-
eters, day and
hour, etc.
Keyboard lock
Mode key:
Selecting the op-
erating mode
Go back to the
previous mode /
menu
Manual mode
75
EN