5.3.3.5 Wifi Info
It is simply an information screen that displays the following content:
1. MAC ADDRESS:
Displays the unique MAC address of each electronic card, provided by the Wifi
module.
2. IP ADDRESS:
The following will appear on the screen:
- IP Address with which the emitter is connected to the Wifi network to which
it is linked.
- IP Address "empty" (...) and text "NO CONNECTION", when:
• No Wifi network is linked.
• There is a linked Wifi network, but it is disconnected
• There is a linked Wifi network, but the connectivity is unsuccessful
In this information screen, when you touch the OK or Mode key, it returns to the Wifi menu. If no
key is touched for 30 seconds, the emitter will return to the last operating mode.
5.3.3.6 Firmware Update
The COSMOS emitter allows the remote firmware update of its electronics, which is configurable
through this last menu within the Wifi menu.
On this menu screen there are 2 options available, which can be selected with the q and p keys,
and by touching the OK key when the desired option is highlighted.
From this last menu, you can touch the Mode key to return to the Wifi menu. If no key is touched
for 30 seconds, the emitter will return to the last operating mode.
1 - AUTO - 02:00 AM
The first option consists of disabling or enabling the firmware
remote update automatic check of the COSMOS electronics,
being enabled by default.
When this option is selected, touching the OK key will directly
disable or enable the firmware update automatic check.
If the option is enabled, the update automatic check will be performed daily at 02:00 AM. Addition-
ally, having the option enabled, whenever there is a restart of Wifi connectivity, 10 minutes later it
will also be checked if there is a firmware update.
2 - CHECK UPDATES
Independently and in addition to the automatic check, there is the possibility to check at the mo-
ment if there is any firmware update, whether or not the automatic check is enabled.
A73023080
83
EN