Audi Junior quattro legends Instrucciones De Uso página 8

How LED daytime running lights work:
The daytime running lights are operated via a
touch-sensitive sensor (Fig. 5) in the cockpit
of the Junior quattro legends. To switch on
the daytime running lights, lightly touch the
sensor. The LED daytime running lights come
on, which is confirmed by a red LED indicator
light in the centre of the sensor.
To switch off the LED daytime running lights,
touch the sensor once again. To prevent
unintentional battery discharge, the LED
daytime running lights switch off automatically
after around 10 minutes. Due to the electronic
sensor-based control system, you should wait
2 seconds between switching the LED daytime
running lights on and off.
1338_12_BA_Sondermodell_junior_quattro_RZic.indd 7
Troubleshooting in the event of a
malfunction:
► Have the batteries been correctly inserted
(polarity)?
► Do the batteries have sufficient power?
► Do the batteries make contact with the
housing (Fig. 3)?
► Did you wait 2 seconds between switching on
and off?
► Calibration failed. Remove and reinsert
batteries to restart calibration process.
Important:
► Do not expose the car to moisture or
humidity. The batteries and contacts may
become corroded.
► Do not charge the batteries supplied with
the car.
► Only charge rechargeable batteries under
adult supervision.
► Remove rechargeable batteries from the toy
before charging.
► Do not mix different battery types or new
and used batteries.
► Insert batteries/rechargeable batteries with
the correct polarity.
► Remove exhausted batteries from the car.
► Do not short-circuit battery terminals.
► Do not dispose of batteries and electronic
components with household waste.
English
7
05.11.12 12:33