Arming the alarm in night mode
Press
.
➔
➔
Enter user code 1 or place
➔
➔
the badge on the reception area:
You will hear 2 long BEEPs.
Only the opening detectors and movement detectors are armed by default, unless
other settings have been made.
Disarming the alarm
Press
.
➔
➔
Enter user code 1 or place
➔
➔
the badge on the reception area:
You will hear 1 long BEEP.
Sending an SOS
From a 2-key remote control,
➔
➔
press and hold the ON key for 5 seconds, or
From a 5-key remote control,
➔
➔
press and hold the SOS key for 5 seconds.
Viewing the information stored in the keypad
The orange LED flashes on the LCD keypad if a fault is
➔
➔
detected and displayed on the screen.
Test each detector by pressing the key on the front.
➔
➔
To turn off the orange LED on the LCD keypad and to clear the fault memory, fully
arm the alarm and then disarm the alarm on this LCD keypad.
If the batteries are low, replace them.
If the radio link lost, contact your installer or replace the batteries.
OR
➔
OR
➔
OR
FR
DE
IT
EN
EL
ES
PT