Asus P Serie Manual De Instalación página 7

Installing optical and storage drives
1. Turn the storage drive assembly upside down with the 3.5-inch bay on top of
the 5.5-inch bay.
. Insert the optical drive upside down to the 5.5-inch bay, then secure it with
two screws on both sides.
3. Turn the storage drive assembly, insert the hard disk drive upside down to the
3.5-inch bay, then secure it with two screws on both sides.

Reinstalling the storage drive assembly
1. Connect the IDE (1A) and power (1B) plugs to connectors at the back of the
optical drive.
. Connect the SATA/IDE (A) and power (B) plugs to the connectors at the
back of the SATA/IDE hard disk drives.
3. Install the storage drive assembly to the chassis.
4. Secure the storage drive assembly with three screws.
1A
R
SATA
1B
B
3
Installation manual
3
A
A
R
IDE
B
4
7