Phonic FIREFLY 808 UNIVERSAL Manual Del Usuario página 8

21. Analog Outputs
These are balanced ¼" TRS line outputs with line (+4dBu) level
signals. Users are able to use these outputs to get a stereo
output channel from each pair of odd and even numbered
outputs, or even a surround mix (5.2 or 6.2). Analog outputs 1
and 2 can be used to send a stereo mix of your analog inputs
or FireWire/USB return signal, which is ideal for use with studio
monitors or subwoofers (if making a surround mix).
21
22. AES/EBU In/Out
This is a standard XLR AES/EBU digital interface that lets you
connect your digital AES-enabled devices to your Firefly. The
IN or OUT LED on the front of the Firefly will light up when the
inputs and outputs are in use.
23. S/PDIF / AES IN Switch
This switch determines which of these digital inputs will be used.
24. S/PDIF In/Out
This is a standard RCA S/PDIF Digital Audio Input/Output that
can be used with digital mixers, DAT recorders, or any external
device that uses the RCA digital interface format. Please use a
75 ohm coaxial cable with RCA plug when using S/PDIF. The
most common problems or glitches incorporated with S/PDIF
transfer are due to use of improper analog cables. Users may
also use these inputs for "High-Speed" S/PDIF devices when
that option is selected in the computer's Firefly mixer software.
24 2
S/PDIF
IN
AES IN
25. FireWire / USB Ports and Select Switch
These connections are digital USB and FireWire (aka IEEE
194) ports that you can use to connect the Firefly 808
Universal to your computer. Doing so will enable you to use
your computer for high quality multi-track recording, as well
as editing, mixing, and so forth, in your favorite Digital Audio
Workstation Software.
The switch that accompanies these ports is used to determine
which of the ports you will be using.
You have two FireWire ports at your disposal; however you
need only connect one to your computer. The second port will
allow you to connect a second Firefly 808 Universal, allowing
twice the number of inputs!
4
26.
These inputs will allow you to send 16 MIDI channels through
the FireWire or USB interface to your computer, as well as
receive 16 back. These channels will be present within the
Firefly Control Software, and available for use in most MIDI-
enabled programs.
27.
This is a standard TOSlink ADAT optical interface that you
can use in the same way as you would use your typical ADAT
devices. This input can also be used for SMUX inputs when
this option is selected in the computer's Firefly mixer software.
28.
These are BNC input/output connectors for standard Word
Clock Syncs, as are used in DVTRs and other digital devices.
29.
Connect the supplied AC power cord to this connector. The
22
other end should be connected to a suitable power supply. The
power supply's fuse is located just below this connector. If your
fuse blows, remove the fuse holder's cover and replace the fuse
with another suitable fuse (as indicated on the fuse-holder's
cover).
MIDI In/Out
26
ADAT In/Out
WCLK IN/OUT
28
AC Power Input and Fuse Holder
29
FIREFLY 808 UNIVERSAL
25
27