Start-Up And Use - Ariston MBT 1812 IZS Manual De Instrucciones

Start-up and use

GB
! After transportation of the appliance, carefully place it in
an upright position and wait at least 3 hours before
connecting it to the electricity mains, to make sure it
operates as it should.
• Clean the inside of the refrigerator well using warm
water and bicarbonate of soda before placing food
inside it.
• The appliance comes with a motor protection control
system which makes the compressor start
approximately 8 minutes after being switched on.
The compressor also starts each time the power
supply is cut off whether voluntarily or involuntarily
(blackout).
When the product is switched on (the
pressed for more than two seconds) the freezer
compartment is set to its default value of
recommend that the
freezer display shows the text "SF") in order to accelerate
the cooling process of the compartment; when the inside
of the compartment has reached its optimal temperature
the function will be deactivated and the food may be
placed inside.
When the appliance is switched on the refrigerator
compartment is set to its default value of
recommend that the
refrigerator display shows the text "SC") in order to
accelerate the cooling process of the compartment. After
a few hours it will be cool enough for food to be placed
inside.
When the appliance is switched on the variable
temperature compartment will be set to its default value of
.
If the product is switched on, the refrigerator and freezer
displays will indicate the temperatures set at that moment.
To change them, simply press the + and - buttons
corresponding to the compartment for which you wish to
change the set temperature. To be specific, each time one
of the buttons is pressed the temperature is increased or
decreased by 1°, and the number of illuminated horizontal
bars is adjusted accordingly. The temperature values that
may be selected for the refrigerator compartment are
+8°C, +7°C, +6°C, +5°C, +4°C, +3°C and +2°C, while the
20
button is
. We
function is set (the
. We
function is set (the
values that may be set for the freezer are -18°C, -19°C, -
120°C, -21°C, -22°C, -24°C and -26°C.
It is possible to select an operating temperature for the
compartment using the corresponding
button; the temperatures are represented by the icons on
the central part of the display (Ice Cream -12°C, Berries -
8°C, Alcohol -18°C). When the three icons are switched
off, it is operating as a normal freezer compartment.
The temperatures are automatically set to
refrigerator compartment and
compartment (these are standard food storage values).
The Cool Care Zone is automatically set to -12°C.
When the " " function is active, the appliance
automatically adjusts the temperatures according to the
conditions inside and outside the refrigerator; the
operation of this function is signalled by the text "AUTO".
Whenever it is necessary to activate the "
at temperatures that are different to the standard storage
values, the " " button must be pressed as soon as
the function is activated and held down while the new
temperatures are set using the + and - buttons. Under
these conditions, the temperatures may be set to 4°C, 5°C
and 6°C for the refrigerator compartment and -18°C, -
19°C and -20°C for the freezer compartment.
When the function is active the temperature
may not be adjusted, however the appliance adjusts itself
automatically so that the optimal settings for the situation
are used: for the refrigerator compartment and
for the freezer compartment. This function is
indicated by the text.
To activate and deactivate the functions simply press the
relevant button and the function status will be signalled by
the corresponding LED switching on or off.
Several functions (
) are incompatible with others
( ,...); remember that there is a pre-set order of
priority which will help you to use the product in the best
possible way.
When the function has finished, press the
button to stop the relevant LED from flashing. This
flashing indicates that the function is complete and that the
bottle should be removed from the freezer compartment.
To enable the Child Lock function, the ALARM button must
be pressed for 2 seconds; the button lock activation is
confirmed by a short beep and the text "LO" "CH"
appears on the refrigerator and freezer displays. This text
is then replaced by the refrigerator and freezer
temperatures set prior to when the child lock function was
enabled.
To deactivate the function, press the ALARM button or 2
seconds; deactivation will be confirmed by a short beep
and the text "LC" "OF" will appear on the refrigerator and
freezer displays for 1 second.
for the
for the freezer
" function