Hu-Friedy Symmetry IQ Manual Del Usuario página 10

8
MAINTENANCE
CLEANING FIBER-OPTIC LIGHT
Wipe debris off the end of the optic fibers at the handpiece with an alcohol soaked
cotton swab. (Fig. 5)
CAUTION: Do not use any sharp pointed tools to clean the optic fiber end face.
In case the light becomes dim, contact your dealer.
CHANGING FIBER-OPTIC LIGHT
Disassemble the handpiece from the handpiece cord. (See Installation & Assembly)
Remove the handpiece sleeve. Use a small screw driver to push the lamp out. (Fig. 6)
Align the lamp pins of the new lamp with the holes and push the lamp into place.
Align the mark on the handpiece sleeve with the same mark on the handpiece cord. Push the sleeve to the cord until it clicks.
(Fig. 7)
4