Network Configuration; Wan Port Type Setup - Ansel 7005 Manual Del Usuario

You can save configuration and reset the Gateway with the can save
Save Configuration
default configuration or with the current running configuration.
Users can Sets/changes the administrator password..
Access Control
You can restart the gateway with the default configuration.
Set to Default
SNTP Setting
Internet.
Gateway can send log information to Syslog Server by UDP ports
Syslog Setting
The gateway supports packets capture and save the packets to your PC. User can use Network
Capture Packets
Protocol Analyzer "Ethereal" to analysis the packets. (Free download from http://www.ethereal.com/)

4.1 Network Configuration

4.1.1 WAN Port Type Setup

For most users, Internet access is the primary application. The GSM Gateway support the WAN interface for Internet access and remote access. The
following sections will explain more details of WAN Port Internet access and broadband access setup. When you click "WAN Setting", the following
setup page will be show. Three methods are available for Internet Access.
. Static IP . PPPoE . DHCP
Static IP:
You are a leased line user with a fixed IP address; fill out the following items with the information provided by your ISP.
IP Address: check with your ISP provider . Subnet mask: check with your ISP provider.
Management Label
SNTP (Simple Network Time Protocol) Configuration for synchronizing gateway clocks in the global
Intelligent Networking & Internet Solutions
www.ansel.com.mx
.
.
60