Ansel 7005 Manual Del Usuario página 65

When your gateway shutdown, or something happen that made gateway can't work fine. Watchdog will reboot your gateway
Watchdog:
automatically when it can't work.
If this function is enabled, when silence is occurred for a period of time, no data will be sent across the network during this period
Silence
in order to save bandwidth. (If you use Asterisk, please disable Silence Compression, it maybe make you call disconnect.)
Compression: (VAD)
The Codec is used to compress the voice signal into data packets. Each Codec has different bandwidth requirement. There are
Voice Codec option:
four kinds of Codec, G.723, G.729AB, G.711_u and G.711_A. The default value is G.723.
When you use the VoIP call, you will heard "DuDu" voice that is dial complete tone. If you don't want to heard that tone , you can
Dial Complete Tone:
disable it.(default is enable).
Setting Termination key to speed up VoIP dial. Select "*" or "#" to Termination key.
Dial Termination
key:
The FXS provides 600/900 OHM impedances for selection.
FXS Impedance:
You can adjust the Phone (Line) in/out volume, range from -9db to 9db (If you adjust too bigger, maybe generation some ECHO
Phone (Line) in/out
or noise)
volume:
You can configure how long the Ring Frequency do you want to use.
Ring Frequency:
Sometimes you input DTMF, but no request. You can adjust this function, range from -6db to +6db.
DTMF tone power:
Intelligent Networking & Internet Solutions
[Telephone Advance] [Network Advance]
www.ansel.com.mx
65