Troubleshooting - Dynex DX-M1113 Guia Del Usuario

DX-M1113.fm Page 8 Tuesday, September 19, 2006 7:07 AM
8

Troubleshooting

Caution: Do not open the open the receiver or transmitter
cases. There are no user serviceable parts inside.
Symptom
Receiver is turned on, but POWER
indicator does not light.
The RF indicator lights when
speaking into the headset, but
there is no sound.
The signal range is too small.
Troubleshooting
Possible solution
• Make sure that the batteries are installed
correctly. You must match the + and –
symbols on the batteries with the + and –
symbols in the battery compartment.
• Make sure that the batteries have a charge.
Change the batteries, if necessary.
• Make sure that the volume control is not
set too low.
• Make sure that the audio cable is
connected securely to the receiver and
amplifier.
• Make sure that the antenna is fully
extended.
• Make sure that the batteries are installed
correctly. You must match the + and –
symbols on the batteries with the + and –
symbols in the battery compartment.
• Make sure that the batteries have a charge.
Change the batteries, if necessary.
• Make sure that the receiver or transmitter
are not located within a magnetic field.