Battery Installation - THINK GIZMOS ROBOSHOOTER TG542-VR Manual Del Usuario

1.3 Battery Installation

Robot Battery Information:
A small crosshead screwdriver (Phillips) is required to remove the battery compartment
●
on the Robot. Insert 4x AA batteries (supplied) into the battery compartment observing
the correct polarity as indicated.
Re-fit the battery cover and secure with the screw.
●
Remote Battery Information:
● A small crosshead screwdriver (Phillips) is required to remove the battery compartment
on the Robot. Insert 2x AA batteries (supplied) into the battery compartment observing
the correct polarity as indicated.
● Re-fit the battery cover and secure with the screw.
(Warning - Remove the batteries if the toy is not going to be used for a long time.)
4