Ialing A; Id N - GE 21011 Manual De Instrucciones

3. Press the desired memory location button. Example, press the number
01 key to store the record in memory location 1. If the memory location
is occupied and, you want to replace it, you must confirm the
replacement by pressing the OK soft key.
NOTE: Press EXIT soft key once to keep previous the setting and return to the
Caller ID menu. Or, press and hold the EXIT soft key on handset to return to
standby mode.
D C

IALING A

ALLER
While reviewing Caller ID records, you may call the caller phone number
showing in the display.
1. Make sure the phone is OFF (not in talk mode).
2. Press cid/vol (up or down arrow) button on the handset or CID (up or
down arrow) button on the base until the desired call record is
displayed. Depending on (a) how the incoming phone number was
formatted when it was received, and (b) whether or not you previously
pre-programmed your local area code into memory, you may need to
adjust the format of the incoming caller 's stored phone number before
dialing it back. The format button lets you change the format of the
displayed number.
46
SELECT MEMORY
01-50
REPLACE MEMO?
OK

ID N

UMBER
--
MEMO
EXIT
01
MEMO
765-4321
EXIT