Setting The Alarms - XtremeMac LUNA Manual Del Usuario


4. Turn the Right Control Knob to highlight either "Contrast" or "Dimmer"
and push to select. The level will blink to indicate that it can be adjusted.
5. Turn the Right Control Knob to increase/decrease the level for contrast
(from 0 to 60) and for the dimmer (from 0 to 20) push to accept and save
your changes. If you set the dimmer to a level lower than 5, touching
any control will automatically bring the dimmer up to a level 5 for a few
moments so that you can make adjustments to your settings.
Note: You may also invert the display colors through the "Display Options"
menu.
SHORTCUT
You may turn the Right Control Knob to increase/
decrease the brightness of the display at any time,
except when in menu or sleep mode.
Setting the Date and Time Format:
Luna's default date format is Month, Day, Year (MM.DD.YY) and default
time format is a 12-hour clock. To select Day, month, year (DD.MM.YY)
and/or to select a 24-hour clock format, follow these instructions:
1. Push the Right Control Knob to access the main menu. The menu will
appear on Luna's display.
2. Turn the Right Control Knob until the "Settings" menu item is highlighted
and push to select.
3. Turn the Right Control Knob until the "Format" menu item is highlighted
and push to select.
4. Turn the Right Control Knob to highlight either "Time Format" or "Date
Format" and push to select.
5. Turn the Right Control Knob to highlight your preferred format and push
to select. This will automatically turn the selected format to "ON" the
other format to "OFF".
Setting the Daylight Savings Time Option:
1. Push the Right Control Knob to access the main menu. The menu will
appear on Luna's display.
2. Turn the Right Control Knob until the "Settings" menu item is highlighted
and push to select.
3. Turn the Right Control Knob until the "DST" menu item is highlighted and
push to toggle between "OFF" and "ON". Activate this feature when Day
Light Savings Time is in effect. This will advance the time one hour.

Setting the Alarms

Luna's two alarms work independently from each other, allowing you to
customize each one to your preference. You can set the time, wake to
source, volume/volume ramping, dimmer brightness and even snooze time
for each.
Setting Alarm Time:
1. Push the Right Control Knob to access the main menu. The menu will
appear on Luna's display.
2. Turn the Right Control Knob to highlight either "Alarm 1" or "Alarm 2"
and push to select.
3. Push the Right Control Knob again and the hour will blink to indicate it
can be adjusted. Turn the Right Control Knob to change the hour, AM or
PM (indicated by an "A" or a "P" next to the time) and push to accept the
correct hour and advance to adjust the minutes.
LUNA™ User Manual
LUNA™ User Manual
4. The minute section will then blink to indicate it can be adjusted. Turn the
Right Control Knob to change the minutes and push to accept and save
your changes.
5. Once you set the alarm time(s), you need to make sure to activate the
alarm(s). Push the Alarm 1 Button on the back left to activate Alarm 1
and/or push the Alarm 2 Button on the back right to activate Alarm 2.
The display will show each alarm time and source icon when the alarm is
activated.
SHORTCUT
You may also access Alarm 1 and Alarm 2 menus by
holding down the corresponding Alarm Button.
Setting Alarm Source:
1. Push the Right Control Knob to access the main menu. The menu will
appear on Luna's display.
2. Turn the Right Control Knob to highlight either "Alarm 1" or "Alarm 2"
and push to select.
3. Turn the Right Control Knob until the "Wake To" menu item is highlighted
and push to select. Turn the Right Control Knob to choose between
"iPod", "Radio", or "Sounds". Highlight your source choice and push to
accept.
Waking to iPod
– If "iPod" is selected as alarm source, be sure to properly dock your
iPod in the Universal dock well. If you do not dock your iPod, the
alarm source will default to the buzzer to make sure that you do
not miss your set alarm time.
– Set your iPod to shuffle or pick the song or playlist you would like
to wake to.
Note: Ensure your playlist has an adequate amount of songs to play for
the amount of time it will take you to wake.
Waking to radio
– If "Radio" is selected as alarm source, make sure the FM and AM
antennas are connected per the instructions.
– Next, you may select a preset station or tune Luna to your
preferred AM or FM station (see "Set Presets").
– To select a preset station, select radio as alarm source (see step 2
above). Push the Right Control Knob to select the "Presets" menu
item and push to select. The band and station will blink. Turn the
Right Control Knob to toggle through your preset stations. Push to
select desired preset station.
– To manually tune the radio, turn the Right Control Knob until
the "Tune" menu item is highlighted. Push to select. The AM/FM
band will blink to indicate that it can be adjusted. Turn the Right
Control Knob to the desired band and push to accept the band
and advance to tune the frequency. The frequency will then blink
to indicate it can be adjusted. Turn the Right Control Knob to tune
the desired frequency and push to accept.
Note: For best FM reception, the antenna should be extended fully and
vertically above Luna. For best AM reception, the AM loop antenna
should be positioned away from Luna.