Anti-Calc System; Cleaning And Storage - Singer Expert Finish II Manual De Instrucciones

Anti-Drip
This iron is designed to reduce dripping and spitting while in use. Steam is
automatically disabled when the soleplate temperature is too low to create
steam, preventing spitting or dripping.
The Anti-Drip system may make a loud clicking sound during use. This is normal
and indicates that the system is functioning correctly.

Anti-Calc System

The built-in Anti-Calc cartridge is designed to reduce the buildup of mineral
substances in the water which occurs during steam ironing, thereby extending
the life of your SINGER
anti-calc cartridge will not completely stop the natural process of lime
scale buildup.
Self-Cleaning
This feature removes loose minerals and other impurities that have been built
up in the steam chamber. It is recommended that this function be performed at
least once a month or more regularly depending on the hardness of the water
used.
WARNING: THE SELF-CLEAN FUNCTION WILL CAUSE HOT STEAM AND
WATER TO BE EJECTED FROM THE SOLEPLATE. TAKE ALL PROPER
PRECAUTIONS AND HOLD IRON AWAY FROM BODY. STEAM AND WATER
ARE VERY HOT AND CAN CAUSE BURNS.
• Fill the water tank half way, as described in the "Filling the Water Tank" section.
• Place the iron on its heel on a flat surface.
• Plug the iron into a grounded outlet.
• Turn the iron on as described in the "Turning the Iron On and Off" section.
• Select the MAX ••• 200º C temperature setting by pressing the Temperature
UP (+) button.
• The MAX ••• 200º C temperature has been reached when HEATING is no
longer visible on the LCD Display.
Expert Finish ™ II Iron. However, please note that the
®

CLEANING AND STORAGE

11