Samsung SR8730 Manual Del Usuario página 62

operating the cleaner
Charging
When the product is initially purchased, the battery is fully
discharged, and you must charge the vacuum cleaning
robot manually.
1. After aligning the charge pins of the main unit with the
charge pin of the charger station, press the main unit
until you hear a Recharging power sound from the
charger.
- The Charging Lamp turns green.
2. Check the charge status of the vacuum cleaning
robot.
- When it is fully charged, all three bars of the battery level icon will Flash simultaneously.
■
If the following appears in the display (as seen in the fi gure below) 10 seconds after connecting
the robot cleaner to the charging station, it indicates that the power switch is turned off. In this
case, please turn on the power switch at the bottom of the cleaner.
Flash Flash
Flash Flash
22_ operating the cleaner
Turn on the Power Switch at the bottom of the product.
Flash Flash
■
When the battery level display fl ashes while
cleaning, the Vacuum cleaning Robot stops
vacuuming and automatically charges itself at the
charger.
■
If the battery level icon on the display moves to
the right as shown while the cleaner is operating,
the cleaner can no longer be operated by either
the remote control or the buttons on the main unit.
In this case, use the charger station to recharge
the battery. (This is when the battery is completely
discharged.)
Power lamp Power lamp
Power lamp Power lamp
<Charge display> <Charge display>
Charge Charge
complete complete
Charging lamp Charging lamp
Charging lamp Charging lamp
Charging Required Charging Required
charging charging