Soba XE510 Modo De Empleo página 7

XE510 DEHUMIDIFIER
Run off aperture in water container.
NOTES
• Install the run-off tube so it slopes downwards (cf. Fig. 1 below) and make sure
it is not pointing upwards (cf. Fig. 2 below) to ensure run off is unimpeded.
• Avoid any kinks and bends in the drainage tube (cf. Fig. 3)
• Do not immerse the end of the run-off tube in water (cf. Fig. 4);
• Do not use the run-off tube at an ambient temperature below freezing point.
MAINTENANCE
Cleaning the Dehumidifier Body
• Wipe the dust off the dehumidifier body with a clean cloth; use a mild household
detergent to remove fingerprints or oil stains.
• Do not use any volatile oils, petrol or paint thinner for cleaning.
Cleaning the Water Container
• Remove the water container
• Rinse the interior and exterior of the container with water
• Wipe the water container dry with a soft cloth, replace it in the dehumidifier.
Cleaning the Air Filter (once every 2 weeks)
1. Take out the water container, pull out the filter (behind the screen cover).
2. Use a vacuum cleaner to clean the filter or rinse with water. If the filter is very
dirty, use a mild detergent. Do not use hot water (above 50° C) to avoid
deformation of the filter.
3. After washing, dry the filter in a cool, airy place. Do not expose the screen to
direct sunshine or place it near a source of heat.
4. Slot the screen back from below and replace the water container.
7
INSTRUCTIONS