T'nB UMMASK Manual De Instrucciones página 4

EN
OUR THANKS
Congratulations on your purchase and thank you for your trust and confidence in T'nB. Our pro-
ducts comply with the regulations and standards in force. Before using this device, we recommend
that you read the instructions and safety guidelines carefully and keep this manual for future
reference.
IMPORTANT SAFETY GUIDELINES
• The power supply of your device must match the initially designed original specifications.
• Never use your device under water or in places that are too damp.
• Do not place flammable objects, explosive substances or dangerous objects near your device.
• Use and store your device in an environment where the temperature is between -10 °C and 60 °C.
• Keep your device out of the reach of children.
• Do not disassemble your device or try to repair it yourself.
• Do not use your device if it has been subjected to impact or is damaged.
• To avoid the risk of electrocution, unplug your device from the main power supply and from any
device before cleaning it or if you are not using it.
• T'nB declines any liability in case of misuse of the product or use with a device with incompatible
electrical characteristics.
• It is recommended to protect the battery when not in use to avoid damage from a fall.
• Keep the safety cover securely closed to prevent water from entering the system and the internal
parts of the product.
• Do not use abrasives to clean the device.
• Do not leave the device near sharp objects that could scratch or damage it.
MODE D'EMPLOI
Conditions of use
This mask is suitable for all types of outdoor sports: Cycling, mountain biking, horse riding, skiing,
running, climbing, in order to filter and protect the user from dust, exhaust gases, industrial emissions,
flu viruses and so-on.
Operating instructions
For the mask to be effective, it must form a hermetic seal around the nose and mouth, so that the air
passes through the filter. A beard, interposition of hair or eyeglass frames must be avoided.
The texture of the mask is made of materials that allow an easy fit to suit different face shapes.
Use the following steps to position the mask:
1) Position the filter and unfold the mask
2) Hold the fasteners in each hand and position the mask in such a way as to cover the nose and
mouth. Position the mask under the chin.
3) Pass each straps over the ears and adjust them as comfortably as possible using the Velcro to secure
the mask in place.
4) Lower the mask onto the nose, pressing firmly to give it the shape of the nasal bridge. It is very
important to press firmly in order to create a good seal.