6.
Install rod (7) through holes in bottom pole
section (6) and eyebolt (8).
7.
Insert pole assembly into tank assembly as shown.
TWO PEOPLE REQUIRED
FOR THIS PROCEDURE.
FAILURE TO FOLLOW THIS
WARNING COULD RESULT
IN SERIOUS INJURY AND/OR
PROPERTY DAMAGE.
IMPORTANT!:
DO NOT OVER
TIGHTEN
8.
Carefully place unit on its side. Secure pole
bottom (6) to tank with anchor strap (52),
washers (9 & 13) and nut (10) as shown.
Upright unit.
Keep unnecessary pressure
off of the pole assembly when
in this position. Two people
recommended for this
procedure.
IMPORTANT!:
DO NOT OVER
TIGHTEN
P/N 214955E
01/04
WARNING!
NOTE:
8
7
8
6
1
12
7
4
5
6
6
9
13
10
52