23.
While holding handle, remove pin (26).
24.
Move elevator up or down to desired
height.
25.
Replace pin (26) full length to lock
system at desired height.
DO NOT LEAVE
ASSEMBLY UNATTENDED
WHEN EMPTY; IT MAY TIP
OVER.
11.
WARNING!
10.
12.
26.
Apply height and transport label
(54) to front of pole as shown.
26
10 ft.
(3.05 m)
21
NOTE:
Peel protective
film from surface
of acrylic
backboard prior
to use.
54
01/04
P/N 214955E