BEFORE USE
Read the instruction manual carefully.
•
Remove the labels and packaging of the tea bags.
•
Before preparing tea for the first time, rinse the appliance by
•
operating it once or twice with water but without tea.
OPERATION
Remove the jug from the base.
•
Open the lid by putting the arrow of the
•
lid in front of the arrow of the jug.
Remove the brewing system by lifting the
•
lid.
Fill the jug with water to the required level,
•
making sure that the water level is
between the minimum and the maximum
indication.
Fill the filter bowl with the desired amount of loose tea, tea bags
•
or coffee. Do not fill above the maximum line marked inside the
filter bowl.
Put the distributor plate on the filter bowl and close the lid. Ensure
•
that the percolator tube fits into the hole in the heating element.
The lid can now be closed.
•
Select the
position on the lid to prepare tea or coffee.
•
Place the jug on the base. Make sure the jug is properly fitted to
•
the base.
Plug in the power supply.
•
Put the power switch on "I" position. The power light will now be
•
illuminated and the brewing will begin.
The brewing will take approximately 5-12 minutes depending on
•
the amount of water used.
Once the brewing is completed, the power light will switch off.
•
WARNING: This percolator makes very hot tea and coffee.
If you do not intend to drink the beverage immediately, turn the
•
lid to the keep warm
everything time the heating element will switch on. With this
position. The pilot light will go on and off
5
USK TM 1 - 070327