Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
PRECAUTIONS
Before connecting the unit to the power source, make
sure the voltage is correct (grounded 230 V, 50/60
Hz).
The cable may only be replaced by one with the same
characteristics as supplied by the manufacturer.
Read these instructions carefully before operating the
unit. They contain very important information about
safety during the installation, operation and
maintenance of the unit.
Keep these instructions for further consultation.
Check out the state of the unit upon unpacking it.
Before connecting the device, make sure the voltage
in the identification plate matches the power source to
be used. During the installation all the safety
requirements must be observed and the instructions of
the manufacturer followed.
The manufacturer will not be liable for the damage
caused by an inappropriate grounding system.
Damage caused by a faulty installation or a wrong use
of the unit is not covered by the warranty.
When in doubt, do not start the unit. Contact the
supplier for questions or detailed information about
problems with the unit.
Do not touch the unit or the power cord with wet
hands.
Unplug the unit in case of storm and when you are not
going to use it for a long time.
Place the unit in a dry place, away from dust and
water splashes.
Do not pull, twist or fold the power cord excessively.
Do not wet the unit; do not use chemical products to
clean it.
Do not allow children or non-qualified personnel
handling the unit.
Do not dismount, repair or modify the unit.
Do not ever place or remove the tanks while the unit
is in operation
SPECIFICATIONS
Height:
650 mm
Width:
350 mm
Depth:
430 mm
Weight:
7 kg
Big tank capacity:
5 L
Small tank capacity:
2 L
Voltage:
230 V, 50/60 Hz
Power:
100 W
Fuse:
Glass 2 A, 110-240 V
Sound power:
<60 dBA
English
13
Publicidad
Tabla de contenido
