Descargar Imprimir esta página

Deif EXM CAN Instrucciones De Installación página 2

Publicidad

WARNING - Power, input and output (I/O) wiring must be in accordance with Class I, Division 2 wiring
methods, Article 501.10 (B) of the National Electrical Code, NFPA 70 for installation in the U.S., or as
specified in Section 18-1J2 of Canadian Electrical Code for installations within Canada and in accord-
ance with the authority having jurisdictions.
A.
WARNING - EXPLOSION HAZARD - SUBSTITUTION OF ANY COMPONENT MAY IMPAIR
SUITABILITY FOR CLASS I, DIVISION 2
B.
WARNING - EXPLOSION HAZARD – WHEN IN HAZARDOUS LOCATIONS, TURN OFF
POWER BEFORE REPLACING OR WIRING MODULES, and
C.
WARNING - EXPLOSION HAZARD – DO NOT DISCONNECT EQUIPMENT WHILE THE
CIRCUIT IS LIVE OR UNLESS THE AREA IS KNOW TO BE FREE OF IGNITABLE CONCENTRA-
TIONS.
D.
SUITABLE FOR USE IN CLASS I, DIVISION 2, GROUPS A, B, C AND D HAZARDOUS LOCA-
TIONS, OR NONHAZARDOUS LOCATIONS ONLY.
E.
WARNING - EXPLOSION HAZARD – DO NOT CHANGE BATTERY UNLESS THE AREA IS
KNOWN TO BE FREE OF IGNITABLE CONCENTRATIONS
F.
This equipment, except for the front panel display, is an open-type device and is required to be
installed in an enclosure suitable for the environment such that the internal part of the equipment is
only accessible with the use of a tool.
AVERTISSEMENT - Le câblage de l'alimentation, des entrées et des sorties doit être en accord avec
la méthode de câblage Classe I, Division 2, Article 501.10 (B) de la National Electrical Code; NFPA
70 pour les Etats-Unis, ou comme spécifié dans la section 18-1J2 de la Canadian Electrical Code
pour les installations au Canada et en accord avec les autorités qui ont la juridiction.
A.
AVERTISSEMENT - RISQUES D'EXPLOSIONS - LE REMPLACEMENT DE COMPOSANTS
PEUT DIMINUER LA COMPATIBILITÉ À LA CLASSE I, DIVISION 2.
B.
AVERTISSEMENT - RISQUES D'EXPLOSIONS - LORSQU'EN ZONE EXPLOSIVE, COUPER
L'ALIMENTATION AVANT DE REMPLACER OU BRANCHER LES MODULES.
C.
AVERTISSEMENT - RISQUES D'EXPLOSIONS - NE PAS DÉCONNECTER LES ÉQUIPE-
MENTS ALORS QUE LE CIRCUIT EST SOUS TENSION OU SI LA ZONE EST CONNU POUR
ÊTRE DÉPOURVUE DE CONCENTRATIONS INFLAMMABLES.
D.
PEUT ÊTRE UTILISÉ DANS LA CLASSE I, DIVISION 2, GROUPES A, B, C ET D ZONES
DANGEREUSES, OU ENVIRONNEMENTS NON DANGEREUX SEULEMENT.
E.
AVERTISSEMENT - RISQUE D'EXPLOSION - NE PAS CHANGER LA BATTERIE SAUF SI LA
ZONE EST CONNUE POUR ÊTRE DÉPOURVUE DE CONCENTRATIONS INFLAMMABLES
F.
Cet équipement, à l'exception de l'afficheur de la face avant, est un appareil de type ouvert et
doit être installé dans une enceinte adaptée à l'environnement de sorte que la partie interne de
l'équipement ne soit accessible qu'à l'aide d'un outil.
5
4189340846 D
7
4189340846 D
6
4189340846 D
Reproduction of the contents of this copyrighted document, in whole or part, without written
permission of DEIF A/S, is prohibited.
Dieses Dokument ist urheberrechtlich geschützt. Das vervielfältigen in Auszügen oder im Ganzen
darf nicht ohne die schriftliche Zustimmung von DEIF A/S vorgenommen werden.
Il est interdit de reproduire ou transmettre tout ou partie de ce manuel, a quelques fins que ce soit,
sans l'autorisation expresse de DEIF A/S.
Se prohibe la reproducción de cualquier parte de éste manual sin el permiso escrito de
DEIF A/S.
Nessuna parte di questo manuale puo' essere riprodotta senza il preventivo permesso scritto di DEIF
A/S.
4189340846 D
Copyright © 2018 DEIF A/S
DEIF A/S - Frisenborgvej 33, DK-7800 Skive, Denmark
www.deif.com
8

Publicidad

loading