Cleaning The Blade System; Replacing The Scarifier Or Aeration Roller (12, 13, 14); Transport - AL-KO COMBI-CARE 36 E comfort Traducción Del Manual Original De Instrucciones

Ocultar thumbs Ver también para COMBI-CARE 36 E comfort:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 53
GB
7.1

Cleaning the blade system

IMPORTANT!
Danger from water
Water in the appliance
causes short-circuits and
destroys electrical com-
ponents.
Do not spray the appli-
ance with water.
Only use a broom or a
brush for cleaning.
1. Stop the appliance and wait until the blade
system has stopped.
2. Disconnect the mains plug.
3. Remove the grass collector (see chapter 6.6
"Attaching and removing the grass col-
lector (10)", page 25).
4. Tip the appliance onto the side and clean the
blade system with a broom or brush.
7.2
Replacing the scarifier or aeration
roller (12, 13, 14)
The scarifier roller is intended for coarse scarify-
ing work and the aeration roller for fine scarifying
work (see chapter 2.3 "Scope of supply",
page 19).
Removing the roller
1. Stop the appliance and wait until the blade
system has stopped.
2. Disconnect the mains plug.
3. Turn the underside of the appliance upwards.
4. Unscrew and lift out the socket head screws
(12/1) (pos. a).
5. Lift the roller (13/1) at one side on the de-
tached end (pos. b).
6. Pull the bearing shell (13/2) off the roller
(13/1) (pos c).
7. Pull the roller (14/1) off the roller drive (14/2)
(pos. d).
Installing the roller
Proceed in reverse order.
26

8 TRANSPORT

IMPORTANT!
Danger of damage to the
appliance
The blade system will be
damaged if the appliance
is moved over a solid sur-
face with the blade system
lowered.
To raise the blade sys-
tem, turn the adjuster
wheel for the working
depth to HIGH (level 1).
1. Stop the motor and wait until the blade sys-
tem has stopped.
2. Turn the adjuster wheel for the working depth
to HIGH (level 1).
3. Remove the mains plug from the power
socket, fold up the mains cable.
Transporting the appliance between two
working areas
Move the appliance to the working area with
the blade system raised.
To carry the appliance: Lift the appliance by
the carrying handle.
Transporting the appliance in a vehicle
Fold in the handlebar.
Secure the appliance in the vehicle against
falling over and sliding.
Secure the appliance against impacts from
loose objects.
Do not place objects on the appliance.
Transport
COMBI-CARE 36 E comfort

Publicidad

Tabla de contenido
loading

Tabla de contenido