Adjusting The Lamp; Operating The Vitacore ® Control Panel; Cleaning And Maintenance - LUCTRA LINEAR TABLE Traducción Del Manual Original

EN
English

Adjusting the lamp

NOTICE!
Risk of damage to the lamp!
Do not rotate the lamp head against the resistance in the swivel joint.
Operation
NOTICE!
Risk of property damage!
The lamp head is designed in such as way that the LEDs can be ideally cooled, thus
achieving a long service life.
Never cover the lamp head. This may cause a fire hazard.
You can change the settings on the VITACORE® control panel.
Operating the VITACORE
▶ see image 7
21. On-Off touch button
22. Touch-operated buttons are used to adjust the intensity of the light (5 levels)
23. Touch-operated buttons are used to adjust the colour of the light (3 levels)
– Tap the On-Off touch button to switch the light on or off.
– Tap the touch button to reduce the light intensity.
– Tap the touch button to increase the light intensity.
– Tap the touch-operated button to set to a warm (reddish) light.
– Tap the touch-operated button to set to a neutral light.
– Tap the touch-operated button to set to a cold (bluish) light.

Cleaning and maintenance

DANGER!
Risk of fatal injury from electric shock!
Never immerse the lamp in water when cleaning it.
NOTICE!
Risk of product damage!
Do not use any abrasive or sharp objects or aggressive cleaning agents.
Do you use any solvents.
– Wipe the lamp dry with a soft damp cloth or with the enclosed microfibre cloth.
• The lamp requires no maintenance.
Service
You can reach the LUCTRA
hotline (German/English): 00800 00 58 28 72.
Alternatively, please call: +49 23 71 66 24 45 (Note that charges may apply depending on the
network provider).
Always have the serial number of your lamp at hand should you have any queries.
You can find this on the label on the power cable and on the back of this user manual.
20 | LUCTRA
control panel
®
team from most European countries on our freephone service
®