Auto Shutoff; Vertical Steam - Hamilton Beach 14870 Manual De Instrucciones

840159500 Ev02.qxd 4/2/07
Features
Power On Light
The Power On light comes on when the
Power
On
Light

Auto Shutoff

The iron will shut off after 1 hour and
5 LINEN
4 COTTON
3 RAYON
2 POLYESTER
1 SILK
OFF
Press the Temperature Selector to turn
Temperature
Selector
Retractable Cord
1. Pull cord to desired length. Do not
2:28 PM Page 5
(continued)
2. To store cord, press and hold the
iron is first
plugged in, and
will remain on
until the iron is
unplugged. The
light will stay on,
even if Fabric
Setting Indicator
w w WARNING: To reduce the risk of
is OFF.
the indicator

Vertical Steam

box around
1. Follow Steps 1 through 3 in
OFF in the
Fabric Setting
indicator will
2. Hang garment in a location that is
blink on and off.
3. Hold iron about 6 inches away from
the iron back on
for another hour
of ironing.
4. To turn iron off, press Temperature
unwind cord
beyond
colored tape
indicator on
cord.
5. Empty water from the iron following
NOTICE: Do not allow hot soleplate to
touch delicate garments.
Cord Release
Button while
guiding the
cord into the
storage area.
an eye injury, hold the plug while
retracting the cord.
"To Steam Iron."
not susceptible to damage from
heat or moisture. Do not hang in
front of
wallpaper, window, or mirror.
garment and
press and
release the
Blast Button
to steam out
wrinkles. Wait
at least 3-5
seconds before
pressing Blast
Button again.
Selector. Set Fabric Setting Indicator
to OFF. Unplug iron. The iron may
be turned off by pressing the
Temperature Selector button for 3
seconds.
directions in "Caring for Your Iron."
5