Electrical Instructions - Reliable BRIO PRO 1000CC Manual De Instrucciones

ELECTRICAL INSTRUCTIONS

To avoid a circuit overload, do not operate another high-wattage appliance on the same
circuit simultaneously with the steam cleaner. If an extension cord is
necessary, a 15-amp rated cord with a polarized plug should be used. Cords rated
for less may overheat and cause damage.
WATER INSTRUCTIONS
Your steam cleaner has been planned for use with normal tap water. In order to extend
the life of this product, if where you are living the level of water hardness is very high, we
recommend using 50% of normal water with 50% of distilled water.
TEST FIRST, THEN CLEAN
Prior to cleaning, test the surfaces to be steam cleaned.
DESCRIPTION OF THE STEAM CLEANER
1. Main switch
2. Main panel
3. Electrical cord
4. Water tank cap
5. Carrying Handle
6. Wheels
7. Flexible hose connecting outlet
A. Ready steam light
B. Low water control light
C. 1 steam regulation light
D. 2 steam regulation light
E. Hot water injection light
F. Pressure gauge
*Product colour may vary from image shown
A
B
C
D
E
F
7
5
2
1
3
4
6
04