Wahl ermila Magnum Handy Traducción Del Manual De Uso Original página 15

Maintenance
Cleaning and care
Danger! Electric shock due to penetration of
liquid.
f Do not immerse the appliance in water!
f Do not allow any liquid to get inside the appliance.
f Only reconnect the appliance to the power supply
if it is completely dry.
Handle with care! Danger from aggressive
chemicals.
Aggressive chemicals could damage the appliance
and accessories.
f Never use solvents or scouring agents.
f Only use cleaning agents and blade set oil recom-
mended by the manufacturer.
Accessories and spare parts are available from your
dealer or our service centre.
f Remove the attachment comb (Fig. 4ⓑ) and lift the blade
set out of the housing (Fig. 6ⓐ). Use the cleaning brush to
remove any cut hairs from the housing opening and from
the blade set (Fig. 7). The cleaning lever (B) can also be
pressed. This allows the cut hairs that accumulate between
the bottom blade and the top blade to be easily removed
using the cleaning brush (EASY CLEANING).
f Only wipe the appliance with a soft, slightly damp cloth.
f Clean the blade set regularly using the hygienic spray.
f Oil the blade set with the blade set oil (Fig. 8).
f For a good and long-lasting cutting performance, it
is important to oil the blade set frequently
f If the cutting performance deteriorates after long
use despite regular cleaning and oiling, the blade
set should be replaced.
Changing the blade set
Warning! Injuries and material damage due to
incorrect handling.
f Switch off the appliance before changing the
blade set.
f The blade set must not be unscrewed.
1. Switch off the appliance using the on/off switch (Fig. 3ⓑ).
2. Slide the blade set off the housing in the direction of the
arrow (Fig. 6ⓐ). Remove the blade set.
3. Replace the blade set by hooking it into the housing and
pressing it down until it clicks into position (Fig. 6ⓑ).
Problem elimination
Blade set is cutting badly or pulling hair out.
Cause: Blade set is dirty or worn out.
f Clean and oil the blade set (Fig. 7/8); if this does not
resolve the problem, replace the blade set (Fig. 6).
Skin injury
Cause: Too much contact pressure on the skin.
f Reduce contact pressure when cutting close to skin.
Cause: Damaged blade set.
f Check whether the blade edges were damaged during use
and replace the blade set if necessary.
Battery operating time is too short.
Cause: Blade set and housing opening are dirty.
f Clean and oil the blade set (Fig. 7/8).
Cause: Battery is worn out.
f Have the battery replaced at a service centre.
Charging indicator light does not light up.
Cause: Appliance has not been correctly placed on the charger.
f Ensure that the appliance has been correctly placed on the
charger.
Cause: Defective power supply.
f Ensure that the charger is plugged into the mains socket.
f Check the mains cable for possible damage.
Disposal
Handle with care! Environmental damage in the
event of incorrect disposal.
f Discharge batteries prior to disposal!
f Correct disposal will ensure environmental protec-
tion and prevent any potentially harmful impact on
people and the environment.
Adhere to the relevant legal requirements when disposing of
the appliance.
Information on the disposal of electrical and electronic
appliances in the European Community:
Within the European Community, national regulations
are specified for the disposal of electrical appliances,
based on EU Waste Electrical and Electronic Equip-
ment Directive 2012/19/EC (WEEE). In accordance
with this, the appliance can no longer be disposed of
with the local or domestic waste.
The appliance will be accepted free of charge by local
collection points or recycling centres.
The packaging for this product is made from recy-
clable materials. Dispose of this in an environmentally
friendly manner by recycling it.
ENGLISH
de
en
fr
it
es
pt
nl
da
sv
no
fi
tr
pl
cs
sk
hr
hu
sl
ro
bg
ru
uk
et
lv
lt
el
ar
15