Carton Contents; Assemble As A Blower - sunjoe SBJ605E Manual Del Operador

Sopladora/aspiradora/ trituradora eléctrica 3 en 1
Ocultar thumbs Ver también para SBJ605E:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Unpacking

Carton Contents

• Electric blower/vacuum/mulcher
• Blower tube
• Blower concentrator nozzle
• Front vacuum/mulcher tube
• Rear vacuum/mulcher tube
• Collection bag
• Wheel assembly
• Manual with registration card
1. Carefully remove the electric blower/vacuum/mulcher and
check to see that all of the above items are supplied.
2. Inspect the product carefully to make sure no breakage or
damage occurred during shipping. If you find damaged or
missing parts, DO NOT return the unit to the store. Please
call the Snow Joe
+ Sun Joe
®
1-866-SNOWJOE (1-866-766-9563).
NOTE: Do not discard the shipping carton and packaging
material until you are ready to use the electric blower/
vacuum/mulcher. The packaging is made of recyclable
materials. Properly dispose of these materials in
accordance with local regulations.
IMPORTANT! The equipment and packaging material are not
toys. Do not let children play with plastic bags, foils, or small
parts. These items can be swallowed and pose a suffocation
risk!
Assembly
m
WARNING!
To avoid serious personal injury, read and
understand all safety instructions provided.
m
WARNING!
Do not connect to power supply until
assembly is complete. Failure to comply could result in
accidental starting and possible serious personal injury.
m
WARNING!
Before performing any maintenance, make
sure the tool is unplugged from the power supply. Failure to
heed this warning could result in serious personal injury.
m
WARNING!
To prevent serious personal injury,
make sure the switch is in the OFF (O) position, the unit is
unplugged, and the impeller has come to a complete stop
before attaching or removing tubes.

Assemble as a Blower

1. Slide the blower tube forward until the notched area on
the blower housing clicks into the slot on the blower tube
(Fig. 1).
2. Insert the concentrator nozzle onto the end of the blower
tube until it locks into position (Fig. 1).
customer service center at
®
NOTE: The concentrator nozzle is used to increase
air flow in tight areas (i.e around flower beds, under
decks, etc.).
Fig. 1
Air outlet
3. Before using the blower function, securely fasten the inlet
cover over the air inlet until the lock button snaps into the
locked position (Fig. 2).
Fig. 2
Inlet
cover
4. To remove the blower tube, turn the ON/OFF power switch
to the OFF (O) position and disconnect the tool from the
power supply.
5. Press the tube release button and remove the blower tube
(Fig. 3).
Fig. 3
ON/OFF switch
Tube release button
7
Notched
area
Slot
Blower tube
Concentrator
nozzle
Inlet cover
lock button
Blower tube

Publicidad

Tabla de contenido
loading

Tabla de contenido