Layout; Leds And Connections - Buffalo HDW-PU3 Guía De Referencia

1. Layout

LEDs and Connections

Top
1
Battery LED
Turns on while the unit is charging.
Glowing red : charging
Glowing green : fully charged
2
Power LED
This LED shows the status of the unit.
Glowing green : power on (If not accessed for 5 minutes, the drive goes into sleep mode and the LED turns off .)
Flashing green : The drive is being accessed.
Glowing red : Indicates that the remaining battery power level has dropped below 25%. Charging is recommended.
3
Wireless LED
Indicates the status of the unit's wireless.
Glowing blue : power on
Flashing blue : wireless communication in progress
4
AOSS LED
Indicates the AOSS status.
Glowing red : Connection by AOSS is complete. (After glowing for 1 minute, the LED turns off .)
Double-fl ashes (red) : The unit is looking for another AOSS device to connect to.
Flashing red : AOSS connection error. The LED will turn off after 60 seconds.
4