Lehmannaudio Linear SE mk II Manual De Instrucciones página 22

42 Linear SE
Functional description
EN
Rear panel
1 2 3 4 5
1 | Line input (stereo)
The RCA sockets of the line input are used to connect your signal source. This
may be e.g. a CD player, DA converter, receiver or media player. The lower socket
with the red ring stands for the right line input, the upper socket with the black
ring for the left line input.
2 | Pre-out (stereo)
The RCA sockets of the pre-out can be used to connect all devices with a line
input, for instance a power amplifier, active loudspeaker or receiver. The lower
socket with the red ring stands for the right pre-out, the upper socket with the
black ring for the left pre-out.
3 | Mains switch
Use the mains switch to turn the Linear SE on and off.
4 | Fuse
Fuse holder for a safety fuse (see technical specifications p. 48). Only fuses with
identical ratings must be used.
5 | Mains connection
Power inlet of the device to be used with the supplied power cord or a cable
with the same plug type. The Linear SE must only be operated on the mains
voltage which the unit has been designed for. This can be read on the type label
on the bottom side of the device.
Linear SE 43
EN