Publicidad
Idiomas disponibles
Idiomas disponibles
Warning
• Always check before any electrical operation, the supply tension shown on
the electricity meter, the adjustment of the circuit breaker, the continuity of the
connection to earth to the installation and that the fuse is suitable.
• The electrical connection to the installation should be made via a socket with
a plug with earth, or via an
Omni-pole
cut-out switch with an opening gap of at
least 3 mm.
If the appliance has a socket outlet, it must be installed so that the socket
outlet is accessible.
• The yellow/green wire of the power supply cable must be connected to the
earth of both power supply and appliance terminals.
• The manufacturer cannot be held responsible for any accidents resulting
from the use of an appliance which is not connected to earth, or with faulty
earth connection continuity.
• Any queries regarding the power supply cord should be referred to After
Sales Service or a qualified technician.
• I f the cable is damaged or to be replaced, the operation must be carried out
the by sale agent with dedicated tools to avoid any accident.
Power line connection
The socket shall be connected according to the relevant standard or
connected to a single-pole breaker.
The method of connection is shown in Figure (5):
N
L2
L1
N
L
N2
N1
L2
L1
PE
PE
400V
PE
220-240V
220-240V
220-240V
220-240V
220-240V
connet to the main power supply
connet to the main power supply
connet to the main power supply
220-240V~
400V~ 2-N
220-240V 2+2N~
Figure (5)
12
Publicidad
