Prepare Your Router For Firmware Recovery-Windows 2000 - Kyocera KR1 Manual De Instrucciones

Click
7. Use the following IP Address
To assign an IP address, enter the following
Default gateway
IP address:
Subnet mask:
Default gateway:
Click to close the Internet Protocol (TCP/IP) Properties window.
8. OK
Select to close the Local Area Connection Properties window.
9. OK
It may take several seconds for this window to close.
Note:
Prepare Your Router for Firmware Recovery–Windows 2000
Using the tip of a paperclip, press and hold the
1.
simultaneously plugging in the power supply via the power adapter receptor.
IP addresses:
192.168.0.2
255.255.255.0
192.168.0.1
Receptor for Power
RESET Button
.
,
IP address Subnet mask
RESET
LAN Ports
7
, and
button, while