Bicycle holder, towbar mounted
– Install the bicycle(s) on the bicycle
holder. Overlap the bicycles if more
than one are to be loaded on the
bicycle holder, with the heaviest bicycle
innermost.
– Check that the handlebar of the
innermost bicycle does not lie against
the tailgate of the car. If necessary,
slacken off the handlebars and turn
them or move the bicycle out one
position.
Note!
Remember that the exhaust gases
from the car are hot and can affect
the bicycle holder or its load. This
especially applies to plastic parts.
If necessary, you should route the
exhaust gases away from the bicycle
holder.
en-GB
Transportation.
21