EN Protective grille, steel
Installing
–
Fold down the rear backrests.
Caution!
The safety grille cannot be folded up
or down when a cargo compartment
cover is installed.
4
Tip: It is easier if two people install the
safety grille.
–
Take the screws and place them in the
roof mountings above the rear side
windows. Move the screws forward to
the smaller cutouts (1).
–
Insert the safety grille through the rear
door. Align the grille's mounting in the
roof mounting on one side (2).
–
Press in the safety grille's sprung
mounting towards the roof mounting
and align it with the other mounting in
the roof mounting on the other side.
–
Install the washer and the dome shaped
nut on each side and tighten by hand.
Note!
Beware of painted surfaces and roof
panels.